Sparkle Welder Kit

Detailed Product Description

Sparkle Welder Kit With Optic Device

QS-55A KIT can be positioned precisely by using the tip of the handpiece. This allows you to fixing the work piece prior to soldering, also possible to create stable and long-lasting connections, especially in places where soldering is not possible. The size of welding points can be set at 20 different levels. The welding points are silky-smooth and uniform in size and texture.

USE

Before use the welder. Must ensure that the supply main is in the rang of use.

And connect it to the appropriate screw that located on wire board of welder. In order to effect welder' s purpose. The diameter of supply cords may be 6-8mm. If put the welder in moist places or prolonged idling periods, it will be moisture.

If moisture occur, it must be drying before use, take care yourself when use the machine connect the machine to 200V supply main, and ensure that earthing that earthing electrode is connects well to the earthed cord. Before you stop the jobs must cut off the supply main, avoid hazard occur. Near to yhe work area, never place any flammable and explosive substance.

Connect the red cord to red terminal, the black cord to black terminal that on the board and put the plugto the appropriate socket. Tighten the nut. Switch on supply main, and then can use the welder.

During working, use the forceps clamps on black cord to tighten the welding parts, and close to the pin on the red cord. Distance decided by size and shape of the parts, as a rule is 0.5-1mm, please note that parts can come into contact with pin; after position, between parts and pin will produce a extremely hot electric arc by control the paddle, parts will be welded in a moment. Before and during use, the discharge spot of pin must be sharpen up to keep the well condition.

During welding you can adjust the current output, in accordance with size of parts, size of welding spot and requirement of craft. Adjust the current output to optimum by the output holder located on board.

Current output will increase when tur the output holder clockwise, and turn it anti-clockwise, current will reduse.